This post may contain affiliate links, which means I will receive a commission if you purchases through my links, at no extra cost to you. Read full disclosure here.
Hey there, DIY enthusiasts! Today, I’m diving into a project that’s bound to elevate your home decor game – a DIY mirror frame. Whether you’re tired of that plain old mirror or just looking to add a touch of rustic chic to your space, this project is for you. I purchased a plain mirror with a thin black frame from At Home that could go over the door or be a wall mount. Then decided to elevate it by building a wood frame. This project also works for a builder-grade mirror too! So below is a list of what i used which can all be found at your local hardware store.
Materials You’ll Need:
- Piece of Wood (I purchased 2 – 1x4x8 inch pine)
- Saw (hand saw or miter saw)
- Wood glue
- Flat Brace or screws
- Sander (Random Orbital Sander)
- Wood stain or paint (optional) + Top Coat
- Measuring tape
- Pencil
- Safety goggles and gloves (safety first, folks!)
Measure Twice, Cut Once:
First thing first, it’s time to break out the measuring tape. I carefully measured the dimensions of my mirror, taking note of both the width and height. After I marked the measurements on the pieces of wood, I used a square tool to help draw my 45-degree angle. This part saves so much time later, not having pieces of wood that are too short, too long, or not the right angle. Accuracy is key here, so double-check your measurements before moving on to the next step.
Cutting and Assembling:
Using my saw, carefully cut the wood into pieces according to my measurements. Once I had all my pieces cut, the next steps was to assemble my frame. Apply wood glue along the edges of the wood pieces and press them together firmly. For this project, I chose to use 2 flat braces on the back of the frame to help secure the angles. For a few imperfections on the edge of the mirror frame, I used wood filler after the wood glue dried. If you prefer a more secure hold, you can also use screws to reinforce the joints.
Finishing Touches:
Now for the finishing touches, sanding and staining. Using my Random Orbital Sander with 220 fine grit sandpaper and I smoothed out any rough edges for a flawless finish. Next, I stained with Special Walnut then sealed using Polycrylic Crystal Clear Top Coat in satin finish both by Minwax.
Attaching the Frame to the Mirror:
Last step, attaching the frame to the mirror. Because the mirror i purchased had a plastic black frame that i didn’t want to change, I chose to make a seperate wall attachment for the wood frame that slide right over the mirror. So both are securely attached to the wall. * Depending on your preference, you can use adhesive strips, brackets, screws or even silicone caulk for a secure hold. Just make sure it’s level and centered for that picture-perfect finish.
The New Mirror:
This easy project can be a great addition to your living room, master bedroom, or master bathroom, transforming a plain old mirror to create a big impact for your space.
Click here, to see the video of this project!
Thanks for joining me on this simple yet oh-so-satisfying DIY project! Whether you’re a seasoned DIYer or a newbie, this wood mirror frame is a must-try. Remember, the beauty of DIY is that there are no rules—so feel free to get creative and make it your own. Be sure to follow and share your masterpiece with us on social media @designed_concept — I can’t wait to see what you come up with! Until next time, happy DIYing!
